NineX19 Hybrid Magwell for Glock 19 Gen 5
$69.00
7075 aluminum Hybrid Magwell for factory Glock 19 Gen 5 and Glock 49 frames. A larger reload opening and secure grip support in a compact profile.
Description
Hybrid Magwell for Glock 19 Gen 5
The NineX19 Hybrid Magwell gives a factory Glock® 19 Gen 5 frame a larger reload opening and a more defined place for your hand at the bottom of the grip. It adds useful reload assistance while keeping the compact profile that makes the Glock® 19 comfortable to carry and shoot.
Machined from 7075 billet aluminum, the magwell wraps higher around the base of the frame for a clean transition between the grip and the reload funnel. A concealed set screw holds it in place without hardware protruding through the rear grip opening.
Check your generation before ordering: This version fits factory OEM Glock® 19 Gen 5 frames. It does not fit Glock® 19 Gen 3 or Gen 4 frames. Have a Gen 3? Choose the NineX19 Hybrid Magwell for Glock 19 Gen 3.
A Better Reload Funnel Without the Bulk
A compact pistol leaves less room at the base of the grip for a magwell. The Hybrid design makes that space count: its enlarged opening gives the magazine a more forgiving path into the frame, while the outer shape stays practical for carry, training, and range use.
The wraparound profile also gives your hand a consistent lower edge. It adds support where your grip meets the magwell without turning the Glock® 19 into an oversized competition setup.
Features
- Designed for factory OEM Glock® 19 Gen 5 frames
- Also fits the factory Glock® 49 compact Gen 5 frame
- Machined from 7075 billet aluminum
- Enlarged opening to help guide magazines into the grip
- Higher wraparound profile for a clean frame-to-magwell transition
- Concealed set screw with no hardware protruding through the rear grip opening
- Compact exterior profile for carry, training, and permitted competition use
- Compatible with factory full-capacity and 10-round Glock® magazines
- Installs without permanent modification to a compatible factory frame
Glock 19 Gen 5 Fitment
This magwell is designed for unmodified factory OEM Glock® 19 Gen 5 and Glock® 49 frames. The Glock® 49 uses a compact Gen 5 grip, so its longer slide does not change which magwell fits the frame.
It does not fit Glock® 19 Gen 3 or Gen 4 frames, the Glock® 19X, full-size Glock® 17/34/45/47 frames, or aftermarket Glock-style frames such as Polymer80, Nomad Defense, Shadow Systems, and SCT.
The magwell is designed to be used without a backstrap. Custom stippling, grip reductions, and other modifications around the base of the frame can affect fitment. Check seating and release with the exact magazines and basepads you intend to use.
Using a Glock® 19 Gen 3? See the Gen 3 Hybrid Magwell. The two versions are shaped for different frames and are not interchangeable.
Installation and Competition Use
For the video and written walkthrough, see How to Install a NineX19 Hybrid Magwell. Magwells are not permitted in every competition division, so check the current rules for your division before use.
Disclaimer
NineX19 manufactures aftermarket components for compatible Glock pistol platforms and is not an OEM firearms manufacturer. This product is not manufactured, authorized, endorsed, sponsored by, or otherwise associated with GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. References to GLOCK models identify the intended fitment of NineX19 products. GLOCK is a registered trademark of GLOCK, Inc. and GLOCK Ges.m.b.H.
Additional information
| Weight | 3 oz |
|---|---|
| Dimensions | 5 × 3 × 1 in |
| Finish | Black, FDE, Battleworn Gray, Sig Dark Gray, OD Green |
KG (verified owner) –
This magwell is exactly what I was looking for and I really didn’t think anything like it existed, especially for my specific situation:
1) I’m limited to 10 rd mags and the mags don’t seat well (if at all) with other options. The Ninex19 magwell allows the 10 rd mags to seat without any resistance.
2) I have a G19. With a compact, the grip is just long enough to allow a full grip. Other options I tried were boxy and covered the pinky finger groove making it odd to grip. The Ninex19 has a sloped bottom that allows for a nice grip at the bottom making it even better than without it.
I would absolutely recommend this magwell!!
Gustavo (verified owner) –
Quality top notch. Easy reloads from now on.
Robert (verified owner) –
Dallas Fite (verified owner) –
Super easy to install, nice quality and color, and the ergonomics are amazing.
Anonymous (verified owner) –
Outstanding design, quality material, and fitment on my Glock 19.
Dan (verified owner) –
Great magwell fits perfectly also improved my grip.
Casey (verified owner) –
Purchased for a 19.5, and this magwell is excellent! It fits my hand extremely comfortably while still being very concealable. Even during quick unholstering drills, my pinky finger fits perfectly on the magwell without having to adjust my grip. Highly recommend!
Buck (verified owner) –
FedEx delivered to the wrong address. I immediately reached out to ninex19 customer support for guidance on what to do and was ghosted entirely. Luckily the people at the address it was mistakenly delivered to brought it to me a couple days later. They apologized because their dog tore the package to shreds. Not sure what was supposed to come with the enhanced magwell but at least I received it. I understand Ninex19 isn’t responsible for this mistake but to not respond at all is lame. The magwell functions like any other.
Jason Ward (verified owner) –
I like the magwells construction, it certainly makes mag changes easier but it does not work with my glock 23 gen 5. It pinches the sides of grip just enough were the magazines won’t freely release.
Matt (verified owner) –
Great service. Great product.
Joshua Schnabel (verified owner) –
Love it! Thank you
Erik (verified owner) –
I ordered one. It came quickly and was simple to put together, worked very well. In fact worked so well I got another one. I recommend it, nice quality.
Kyle Muller (verified owner) –
LOVE