No products in the cart.
NineX19 Revolution Barrel for Glock 34 Gen 3
$109.00
Spiral-fluted extended barrel for Glock 34 Gen 3 and Gen 4 slides and compatible full-size Gen 3-pattern builds. The NineX19 Revolution Barrel is made in the USA from 416R stainless steel with a broach-cut 1:10 twist and deep target crown.
The NineX19 Revolution Barrel for Glock 34 Gen 1–4 combines an extended competition-length profile with distinctive spiral fluting, an updated barrel hood, and a deep-cut target crown.
Each barrel is CNC machined in the USA from stress-relieved and heat-treated 416R stainless steel. Broach-cut rifling with a 1:10 twist supports commonly used 9mm ammunition weights ranging from 115-grain range ammunition through 147-grain defensive and competition loads.
Glock 34 Gen 3 and Gen 4 Barrel Features
- Designed for Glock 34 Gen 3 and Gen 4 slides
- Compatible with appropriate full-size and compact-long Gen 3-pattern builds
- Non-threaded, standard Glock 34-length configuration
- CNC machined from stress-relieved and heat-treated 416R stainless steel
- Broach-cut rifling with a 1:10 twist
- Distinctive spiral-fluted exterior
- Updated barrel-hood geometry
- Deep-cut target crown
- Available in Black Nitride, Gunmetal, and Gold Nitride
- Machined in the USA
Which Glock 34 Generations Does This Barrel Fit?
This barrel is designed for Glock 34 Gen 3 and Gen 4 slides using the earlier Glock 17 and Glock 34 barrel-lug configuration commonly grouped within the Gen 1–4 barrel family.
The Glock 34 was introduced during the Gen 3 era, so there are no factory Glock 34 Gen 1 or Gen 2 pistols. The Gen 1–4 designation identifies the earlier barrel-lug family and distinguishes this barrel from the Glock 34 Gen 5 configuration.
Does This Barrel Fit a Glock 34 Gen 3?
Yes. Glock 34 Gen 3 is one of the primary applications for this barrel. It is designed as a drop-in component for compatible OEM-pattern Gen 3 slides, subject to normal firearm and aftermarket-component tolerances.
Does This Barrel Fit a Glock 34 Gen 4?
Yes. Glock 34 Gen 3 and Gen 4 slides use the earlier Glock 17 and Glock 34 barrel-lug configuration supported by this NineX19 barrel.
Barrel compatibility does not make complete slide assemblies interchangeable between every frame generation. The frame, recoil spring assembly, and other components must still match the intended configuration.
Does This Barrel Fit a Glock 34 Gen 5?
No. Glock changed the barrel-lug and locking geometry for the Glock 34 Gen 5. Select a NineX19 barrel specifically listed for Glock 34 Gen 5 when working with a Gen 5 slide.
Does It Fit Polymer80 Full-Size and Compact-Long Frames?
This barrel can be used with compatible Glock 34-length Gen 3-pattern slides installed on appropriate full-size or compact-long frame configurations. Barrel compatibility depends primarily on the slide, locking block, and upper configuration rather than grip length alone.
Confirm that every aftermarket component uses the appropriate Glock 34 Gen 3-pattern geometry before assembly.
What Is the Difference Between Revolution and Match Barrels?
The primary visual difference is the fluting pattern. The NineX19 Revolution Barrel uses spiral fluting, while the NineX19 Match Barrel uses pentagonal flat fluting.
Both barrel families are machined from 416R stainless steel and use broach-cut rifling with a 1:10 twist. Choose between them based on the compatible barrel configuration, finish, and exterior design you prefer.
Is the Glock 34 Barrel Longer Than a Glock 17 Barrel?
Yes. The Glock 34 uses an extended slide and barrel compared with the Glock 17. A Glock 17 barrel is not the correct standard-length replacement for a Glock 34 slide.
Select a barrel specifically designed for the Glock 34 when maintaining the intended slide-to-muzzle relationship and full barrel length.
Available Finishes
- Black Nitride
- Gunmetal
- Gold Nitride
Finish availability may vary. Select the currently available finish from the product options above.
Installation and Function Testing
This barrel is designed as a drop-in component for compatible OEM-pattern slides and frames. Individual firearm and aftermarket-component tolerances can vary, so inspect the installed barrel for proper lockup, chambering, slide movement, and unrestricted operation before firing.
Safely function-test the completed pistol with the ammunition and magazines you intend to use. Installation and inspection by a qualified individual are recommended whenever replacing firearm components.
Important Safety Notice
Always verify that the firearm is unloaded before installation. Do not fire the pistol until barrel fit, slide operation, and safe function have been confirmed. Consult a qualified gunsmith if you are uncertain about compatibility or installation.
Trademark disclaimer: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. “GLOCK” is a federally registered trademark of GLOCK, Inc. and is used only to identify product compatibility.
| Weight | 5 oz |
|---|---|
| Dimensions | 4 × 7 × 1 in |
| Finish | Black Nitride, Gunmetal, Gold Nitride |
1 review for NineX19 Revolution Barrel for Glock 34 Gen 3
Related products
Out of stock
Price range: $79.95 through $154.00
Price range: $154.00 through $159.00
Out of stock
Price range: $149.00 through $154.00
Nick N. (verified owner) –
Love this barrel! Went with the gold nitride.
I have well over 800 rounds through this barrel, as I care more for functionality.
I have had no failures while shooting this barrel myself. There was one failure to feed and one failure to eject on two different occasions while training my sister and a friend. May have been caused by improper grip. However, I have never had reliability issues with any rounds I have fired.
After running let’s say 200 rounds in one session, lack of lubrication and heat can cause the slide and barrel to not cycle by hand as easily. That’s the only turn off, but just muscle it and it’ll slide back.
I switch between my factory barrel and this all the time, slide function is only thing I’d say is a down side. But you run a risk with all aftermarket barrels so not a big deal.
I have had this barrel in the slide for home defense, but I feel more comfortable with the factory barrel installed on my night stand.
Cannot knock it though, beautiful design, always functions as should, and a great price.
Note: I have ONLY run ninex19’s Glock 34 gen 3 slide since I started using this barrel. My experience of this barrel and statement above is WITH ninex19’s slide, not factory.